Cooling Fan And Water Curtain Pad Cooling
Greenhouse fan is a special greenhouse fan, for the growth of crops with humidification, heat preservation, ventilation.
Cooling Fan Introduce
Push-pull fan Frame: 1.0mm galvanized steel plate, galvanized thickness 180g/M2, riveted with special aluminum rivets.
Push-pull fan Blinds: 0.6mm galvanized sheet, galvanized thickness 180g/M2. Automatic opening and closing, controlled by special UV nylon rotating shaft. The switch is accomplished with the help of two power-free non-rotating weight configurations (patented design). This mechanism ensures trouble-free operation of the Cooling Fan for many years. If the opening and closing of the blade are affected by the deformation during transportation or use, the long cover plate on both sides of the outer frame can be removed, and the blade can be removed and re-installed after correction.
Push-pull Fan blade: there are 6 blades, using 2mm aviation aluminum-magnesium alloy impeller, light weight, strong toughness, not easy to break. The shape of the blade ensures the production of extremely strong airflow while maintaining a very low noise level, which can be considered to be the lowest noise level of its kind worldwide.
greenhouse fan Motor (motor) : Cast aluminum housing, three phase (single phase can be customized) 50 or 60HZ, class B3, insulation class F, protection class IP55 universal form. Can adapt to the harsh desert-like environment.
greenhouse fan Motor plate (three pieces) : 3mm thick galvanized plate, galvanized thickness 180g/M2
Cooling Fan Transmission: V-belt, imported (USA, Samsung, Sakato, etc.). The tightening adjustment is very simple, only one bolt on the side of the air intake needs to be tightened, and no other parts need to be removed. Use the index finger and middle finger to press the middle position of the belt to check whether the tightness is appropriate, with the belt pressure 15-20mm.
Push-pull fan Safety net: There is a safety net on the side where the air enters, which is hot-dip galvanized after welding.
Cooling Fan Connecting plate: cast aluminum
Push-pull fan Pulley (including bearing and uranium core) : cast aluminum
Diversion ring: 1.0mm galvanized steel plate, galvanized thickness 180g/M2
Cooling Fan Plastic: Nylon 6
